logo
Latest company case about
Solutions Details
Created with Pixso. Home Created with Pixso. solutions Created with Pixso.

South Africa Warehouse Racking Project: 50 Medium-Duty Racks, 6 Heavy-Duty Racks and 10m Safety Net with Door

South Africa Warehouse Racking Project: 50 Medium-Duty Racks, 6 Heavy-Duty Racks and 10m Safety Net with Door

2026-11-19

Project Overview

A distribution warehouse operator in South Africa sent us a layout drawing together with a very specific brief: they needed a complete racking system that would cover every storage zone of their new facility, not just a single product line. As a custom manufacturing factory, we took the drawing, re-engineered the layout, and delivered a single-source package consisting of 50 sets of medium-duty racks, 6 sets of heavy-duty racks and a 10-metre safety net with an integrated access door.

The result is a warehouse that now stores cartons, small parts and palletised loads in one continuous, code-compliant layout, with a protected walkway and a secure mesh enclosure where the previous plan had none.

Customer Requirements

  • 50 sets of medium-duty racks for cartons, spare parts and fast-moving SKUs picked by hand.
  • 6 sets of heavy-duty racks for palletised goods with high uniform loads and forklift access.
  • 10 m safety net with door to close off the open side of the elevated platform and control access.
  • Layout optimisation based on the customer's own drawing, aisle widths and building columns.
  • One supplier, one shipment — the client wanted a single partner responsible for engineering, production, packing and delivery.

Our Custom Engineering Approach

1. Drawing Review and Layout Engineering

Our engineering team started from the client's drawing and checked every dimension against real-world operating conditions: forklift turning radius, minimum aisle width, column spacing and the load path between receiving and dispatch. We then proposed a mixed layout where the medium-duty sections handle high-turnover picking close to the packing area, while the heavy-duty sets are positioned along the outer wall where pallet handling is most efficient.

2. Specification and Load Calculation

Each rack type was specified separately so the client never over-pays for light storage or under-specifies a critical bay.

Item Quantity Key Specification Application
Medium-duty rack sets 50 sets Bolted upright frames, adjustable beams, powder-coated finish Cartons, spare parts, manual picking
Heavy-duty rack sets 6 sets Reinforced uprights, heavy-gauge beams, pallet-level loading Palletised goods, forklift access
Safety net with door 10 m Full-height mesh infill, framed access door, fixing brackets Platform edge protection and access control

3. Manufacturing and Quality Control

All uprights, beams, bracing and mesh panels were produced in our own factory, which meant tolerances stayed tight and the lead time stayed short. Before packing we carried out a pre-assembly check on sample bays to confirm hole pitch, beam engagement and that every fixing matched the drawing. Surface treatment was powder coating for corrosion resistance in a coastal warehouse environment, and all parts were batch-marked to make on-site assembly a straightforward bolt-together job.

4. Packing, Shipping and Installation Support

  • Flat-packed bundles, separated by component type and bay number.
  • Edge protection and steel strapping for sea freight to South Africa.
  • Assembly drawings, a parts list and step-by-step guidance supplied with the shipment.
  • Remote technical support during installation so the client's own team could build the system on site.

Project Results

  • Complete coverage: every storage zone in the warehouse was addressed by one coordinated package, from picking-level shelving to pallet racking.
  • Improved safety: the 10 m safety net with door closed the open platform edge and gave the client controlled, lockable access.
  • Better space efficiency: the re-engineered layout reduced wasted aisle space and increased usable storage positions without changing the building footprint.
  • Single-source accountability: one factory, one drawing set, one shipment — no compatibility issues between suppliers.

Why Choose a Custom Racking Factory

Standard catalogue systems rarely fit a real building. Because we manufacture in-house, we can adjust bay widths, beam levels, load ratings and safety accessories to the customer's drawing instead of forcing the customer to fit our catalogue. Whether the requirement is fifty light-duty rack sets, six heavy-duty bays or a single custom safety enclosure, the whole warehouse can be planned, produced and shipped as one project.

If you are planning a warehouse in Africa, the Middle East or Latin America and already have a drawing in hand, send it to us — we will return a layout proposal, a specification table and a quotation within a short turnaround.